Product Description - Otto Bock Skippi plus Instructions For Use Manual

Product description
3

Product description

The Skippi plus power wheelchair for children can be used
indoors according to EN 12184 category A. But it also ful-
fills the requirements for outdoor areas with regard to the
climate and splash-proof tests.
The Skippi plus is designed to be compact and manoeuvra-
ble indoors. The powerful drive system supplied by two 12 V
batteries and the drive wheels allow obstacles to be over-
come easily and provide safe driving characteristics.
The power wheelchair is controlled by an enAble50 wheel-
chair control unit. The latter includes a control panel to enter
driving commands and display the current status as well as
a controller that operates the drive motors and other electri-
cal functions based on the inputs.
The enAble50 is programmable so that the controls can be
adjusted to the individual user requirements. The speed, ac-
celeration and delay values, for example, can be adjusted.
A special control unit with alternate input modules is availa-
ble (see chapter 7.2).
24 Ottobock
|
Special features of the Skippi plus power wheelchair in-
clude:
„ Compact design.
„ Easy operation.
„ Easy to service due to the modular design.
„ Easy access to all modules.
„ Individual adaptation possibilities with options and cus-
tom fabrication using modular components (chassis,
seating system, control unit, accessories).
The modular design allows the Skippi plus to be equipped
with further modules and installed equipment in addition to
the main components (see Fig. 1), e.g. attendant controls,
electric seat options, etc. These are described in greater
detail in chapter 7.
Skippi plus