Disposal; Information On Re-Use - Otto Bock Skippi plus Instructions For Use Manual

DisposalI | Information on Re-Use
Charging connection
Nominal charging current 6 A
Residual ripple
Characteristic charging
curve
Primary fuse
Secondary fuse
Protection category
Ambient temperature
Display
Weight
Dimensions (W x H x D)
Protection against corrosion
Corrosion protection
Technical changes reserved.
Tab. 13 Technical data
90 Ottobock
|
24 V DC
< 1 %
IUU with trickle charging
phase, computer-controlled
G-fuse link T 4 A, not acces-
sible from the outside
Electronic, reversible inverse
polarity protection, short cir-
cuit proof, open circuit proof,
overheating protection
IP 20
-10 °C to +40 °C
3 LED
1.25 kg
140 x 85 x 170 mm
Powder-coated frame
11

Disposal

INFORMATION
All components and materials of the power wheelchair
must be recycled or disposed of properly.
If the power wheelchair is no longer in use, it must be dis-
posed of properly in accordance with national regulations.
Return defective batteries (battery pack) to your specialist
dealer when purchasing new ones.
12

Information on Re-Use

The power wheelchair is suitable for re-use.
Similar to second-hand machines or cars, products that are
being re-used are subject to increased strain. Attributes and
functions must not change in a way that could endanger
patients or other persons within the product's life cycle.
Based on market observations and the current state of tech-
nology, the manufacturer has calculated that the power
wheelchair can be used for a period of 5 years, provided
that it is used properly and that the service and maintenance
instructions are observed. Storage times at the dealer or
with paying parties are not included in this period. It should
Skippi plus