Managing Files By Using The Usb Flash Drive (Powerconnect 8100-Series Switches Only) - Dell PowerConnect 8024 User Configuration Manual

Hide thumbs Also See for PowerConnect 8024:

Table of Contents

ip host labpc3 192.168.3.59

Configuration script 'labhost.scr' applied.

6 Verify that the script was successfully applied.

console#show hosts

Host name: test

Name/address lookup is enabled

Name servers (Preference order): 192.168.3.20

Configured host name-to-address mapping:

------------------------

Managing Files by Using the USB Flash Drive (PowerConnect 8100-

series switches only)

In this example, the administrator copies the backup image to a USB flash

drive before overwriting the backup image on the switch with a new image.

The administrator also makes a backup copy of the running-config by

uploading it to a USB flash drive. After the backups are performed, the

administrator downloads a new image from the USB flash drive to the switch

to prepare for the upgrade.

This example assumes the new image is named new_img.stk and has already

been copied from an administrative host onto the USB flash drive.

To configure the switch:

1 Insert the USB flash drive into the USB port on the front panel of the

switch. The USB flash drive is automatically mounted.

2 Copy the backup image from the switch to the USB flash drive.

console#copy image usb://img_backup.stk

Mode................................... unknown

Data Type.............................. Code

Managing Images and Files

------------------------

192.168.3.56

192.168.3.58

192.168.3.59

Show Quick Links

Table of Contents