Clear Cmos Jumper; Figure 4-3: At/Atx Mode Selection Jumper Location; Table 4-2: At/Atx Mode Selection - IEI Technology KINO-CV-D25501 User Manual

Jumper Location:
Set both of the jumpers select AT or ATX power mode for the KINO-CV-D25501/N26001.
AT power mode limits the system to on/off. ATX allows the system to use various power
saving states and enter a standby state, so the system can be turned on remotely over a
network. The settings on both jumpers should be the same.
Pin Description
Closed ATX mode (Default)
Open AT mode

Table 4-2: AT/ATX Mode Selection

Figure 4-3: AT/ATX Mode Selection Jumper Location

4.5.2 Clear CMOS Jumper

Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
If the KINO-CV-D25501/N26001 fails to boot due to improper BIOS settings, the clear
CMOS jumper clears the CMOS data and resets the system BIOS information. To do this,
Page 52
KINO-CV-D25501/N26001 SBC
See Figure 4-3
JP3
3-pin header
See Table 4-3
See Figure 4-4