Adjusting The Printhead Automatically - Oce CS2136 Reference Manual

Adjusting the Printhead Automatically

If printed vertical lines are warped or colors are out of alignment, adjust the Printhead
alignment. Adjust the Printhead alignment automatically or manually by using a printed
test pattern.
Follow the steps below for standard automatic adjustment of the Printhead.
1
Load unused paper.
If using sheets, load paper A4/Letter-sized or larger. You will need three sheets
at most.
Note
•
Always specify the paper type when loading paper. Using paper that you have not
specified on the printer may cause feeding problems and affect the printing quality.
•
We recommend loading a type of paper that you use often.
2
Press the Menu button to display MAIN MENU.
3
Select Adjust Printer→Auto Head Adj.→Advanced Adj.→Yes and press the
OK button.
A test pattern is printed for printhead adjustment.
After reading the pattern, the printer automatically adjusts the Printhead alignment.
Note
•
If adjustment is not possible using highly transparent film or similar media, try
another type of media. If you cannot adjust the printhead as desired using special
media, select Advanced Adj.
27