Tensioning Rail - Daewoo KORANDO Service Manual

1B2-84 M161 ENGINE MECHANICAL

TENSIONING RAIL

Preceding Work : Removal of cylinder head
1 Sliding Rail Pin
2 Sliding Rail
Removal & Installation Procedure
1. Remove the timing gear case cover (3).
Notice
Be careful not to damage the gasket.
2. Remove the sliding rail (1) from the sliding rail pin (2).
Notice
Replace the plastic guide (2) if it is damaged.
For installation, exactly align the plastic guide (2) with
the sliding rail (1).
3. Installation should follow the removal procedure in the
reverse order.
3 Timing Gear Case Cover