Microscan MS-9 User Manual page 83

Separator Character (UPC/EAN)
Note: If Separator Character has been changed to any other character and you wish to
re-define the separator as a comma, you will need to define it in the embedded menu or
default the scanner by a <Zd> command.
As required by the application.
Usage:
Allows the user to change the separator character from a comma to a
Definition:
new character.
Serial Cmd: <K473,UPC status,UPC/EAN status,supplementals status,separator sta-
tus,separator
(comma)
Default: ,
Options: Any ASCII character
character,supplemental type>
Chapter 5 Symbologies
MS-9 Scanner User's Manual
5-15