Symbologies - Microscan MS-9 User Manual

Chapter
5
This section describes the various symbol types that can be read and decoded by the
scanner.
Code 39 is enabled by default. To enable all codes, right-click
under Symbol Type in the Utilities menu and select Enable, or send a
command to the scanner from the Terminal window.
Note: When assigning characters in user-defined fields, the characters
can only be entered through embedded menus, not through ESP or serial commands.
See
www.aimusa.org/standards
1. If using an I 2/5 symbol, verify that the number of characters in the symbol being scanned
matches the symbol length enabled for the I 2/5 symbology type (default is 10 and 6).
Symbologies by ESP ...............................................................................5-2
Symbologies by Serial Command............................................................5-3
OMR ........................................................................................................5-4
Code 39 ...................................................................................................5-4
Code 128 .................................................................................................5-7
Interleaved 2 of 5 .....................................................................................5-8
Codabar .................................................................................................5-11
UPC/EAN ...............................................................................................5-14
Code 93 .................................................................................................5-17
RSS Expanded ......................................................................................5-18
RSS Limited ...........................................................................................5-19
RSS-14 ..................................................................................................5-20
Narrow Margins .....................................................................................5-21
Symbology ID ........................................................................................5-22
Background Color ..................................................................................5-23
Autodiscriminate ....................................................................................5-24
for additional information about symbologies.

Symbologies

Chapter Contents
Autodiscrimination
1
MS-9 Scanner User's Manual
serial
<P>
and
NULL <> ,
5-1