Table of Contents
Advertisement
Beeper
Can be used as an audible verification that either a good read or a noread
Usage:
has occurred.
A beep is emitted either after each good read of a bar code symbol or
Definition:
after each noread.
Note: Beeper will also sound if any of the following occur:
• the scanner is defaulted
• a send/save command from ESP or an Exit command from any
embedded menu
• a <Z>, <Zp>, <Zd>, or <KS,1> command is sent
Beeper Status
<K702,status,volume>
Serial Cmd:
Default:
On Good
0 = Disabled
Options:
1 = On Good Read
2 = On Noread
Chapter 8 I/0 Parameters
MS-9 Scanner User's Manual
8-7
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-9 and is the answer not in the manual?
Questions and answers