Counts - Microscan MS-9 User Manual

Counts

Counts

(These commands are READ ONLY.)
Power-on
Used for detecting unwanted resets caused by power supply problems or
Usage:
ESD transients.
Returns the number of times the scanner has been re-powered or a
Definition
watchdog reset occurs.
Send <K406?>
Serial Cmd:
Returns <K_power-ons,resets>
0 to 65,535 power-ons.
Read Only
Ranges:
Resets
Used for detecting unwanted resets caused by power supply problems or
Usage:
ESD transients.
Definition Resets include watchdog reset, <A>, <Z>, <Zd>, and hardware
defaults. A watchdog reset is a reset that is forced whenever the softw are
locks-up.
Send <K406?>
Serial Cmd:
Returns <K_power-ons,resets>
0 to 65,535 resets.
Read Only
Ranges:
MS-9 Scanner User's Manual
9-4