Autodiscriminate - Microscan MS-9 User Manual

Autodiscriminate

Autodiscriminate

Although Autodiscriminate is not a configuration command, but it is included here as
a convenient tool for enabling most symbol types.
Commonly used for quick setup mode to detect symbol type. This is par-
Usage:
ticularly useful for users who might be unfamiliar with their application's
symbology.
Note: It does not alter individual fields such as Start/Stop, Fixed
Length, etc. These need to be setup individually.
Enables all available symbology types except PDF417, UCC/EAN 128. The
Definition:
user may also individually disable/enable each symbology type.
Serial Cmd: <P>
Default: Code 39
<Q> Enables Code 39 only
Other
Options:
<R> Enables Codabar only
<S> Enables I 2/5 only
Note: If using an I 2/5 symbol, verify that the number of characters in the symbol being
scanned matches the symbol length enabled for the I 2/5 symbol type (default is 10 and 6).
MS-9 Scanner User's Manual
5-22
Enables all symbologies except noted above
(only)