Sequence On Mismatch - Microscan MS-9 User Manual

Sequence On Mismatch

Sequence On Mismatch

Note: Matchcode must be set to Sequential for this command to function.
Enable this parameter if every trigger event should have a decode and
Usage:
more than one consecutive mismatch may occur.
Disable this parameter if every trigger event should have a decode but no
more than one consecutive mismatch may occur.
When set to Enabled, the master symbol sequences on every decode,
Definition:
match or mismatch. When set to Disabled, the master symbol will not
sequence whenever consecutive mismatches occur.
Serial Cmd: <K223,matchcode type,sequential matching,match start position,match
length,wild card,sequence on
Default: Disabled
0 = Disabled
Options:
As an example of Sequence On Mismatch Enabled, consider the following decodes:
Master Symbol
001
002
003
004
006
007
As an example of Sequence On Mismatch Disabled, consider the following decodes:
Master Symbol
001
002
003
003
004
006
You can access Master Symbol Database operations from the Utilities menu.
1. In both tables, when the expected number is missed by only 1, the sequence skips over the
next number in order to resume the sequence.
MS-9 Scanner User's Manual
6-8
1 = Enabled
Decoded Symbol Master After Decode
001
abc
def
005
ghi
007
Decoded Symbol Master After Decode
001
abc
def
003
005
006
noread,sequence on
002 Sequenced on match
003 Sequenced on mismatch
004 Sequenced on mismatch
006 Sequence skipped
007 Sequenced on mismatch
008 Sequenced on match
002 Sequenced on match
Sequenced because of
003
previous match
003 Not sequenced
004 Sequenced on match
006 Sequence skipped
007 Sequenced on match
mismatch>
1
Action
Action