Postamble; Postamble Characters - Microscan MS-9 User Manual

Postamble

Postamble

Postamble Status
Used for identifying and controlling incoming data. For example, defining
Usage:
the postamble as a carriage return and a line feed causes each decoded
message to be displayed of on its own line.
Defines a one- to four-character data string that can be added to the end
Definition:
of the decoded data.
<K142,status,postamble character(s)>
Serial Cmd:
Default: Enabled
0 = Disabled
Options:
Postamble Character(s)
<K142,status,postamble
Serial Cmd:
^M^J. Corresponds to carriage return/line feed/null/null, as displayed in
Default:
the menu.
Options: Up to four user-defined ASCII characters, including control characters.
Within a Serial Command
To enter control characters within a serial command, hold down the con-
trol key while typing the desired character.
Example:
Within an Embedded Menu
Control characters entered on the command line are displayed in the
menu as mnemonic characters, such as: <CR><LF><NUL><NUL>
To enter a control character from within an embedded menu, first type in
a space (with the space key). This has the effect of allowing the control
key to be recognized as a part of the control character. Next hold down
the control key while typing the desired character.
Example:
MS-9 Scanner User's Manual
3-16
1 = Enabled
character(s)>
<K,CNTL-m CNTL-j>
Space CNTL-m Space CNTL-j
to enter ^M^J.
to enter ^M^J.