Operation Command Output - Microscan MS-9 User Manual

Operation Command Output

Operation Command Output
Important: This option must be enabled for ESP to operate.
Used when brackets are required to delineate certain scanner outputs
Usage:
such as counters.
Controls the output of command brackets.
Definition:
<K738,status>
Serial Cmd:
Default: Enabled
0 = Disabled
Options:
Disabled
When set to disabled, the start and stop brackets < and > are not sent with responses
to the operational commands such as <T> and <N> and utility commands such as
counters and part number requests do not function.
Enabled
Directs the scanner to bracket non-bar code scanner data such as counters with com-
mand start and stop characters, and echo the command to the host.
MS-9 Scanner User's Manual
8-10
1 = Enabled