Match Length - Microscan MS-9 User Manual

Match Length

Match Length

For example, if Match Length is set to 6 in a 10 character symbol, and
Usage:
Match Start Position is set for 2, only the 2nd through 7th characters
(from left to right) will be compared.
Defines the length of the character string that will be compared with that
Definition:
of the master symbol when Match Start Position is set to 1 or greater.
When Match Start Position is set to 0, no comparison will occur.
<K223,matchcode type,sequential matching,match start
Serial Cmd:
length,wild card character,sequence on noread,sequence on mismatch>
Default: 1
Options: 1 to 64
Wild Card
For example, with Wild Card character defined as the default asterisk,
Usage:
defining
CR234, but not CR2345. Entering the wild card at the end of the master
symbol as in
as CR1, CR23, CR358, etc.
Wild Card character allows a user to define a wild card character as part
Definition:
of the master symbol.
<K223
Serial Cmd:
length,wild card
match>
Default: * (asterisk)
Options: Any valid ASCII character
MS-9 Scanner User's Manual
6-6
as the master symbol will result in matches for CR134,
CR*34
will result in matches for variable symbol lengths such
CR*
,matchcode type,sequential matching,match start position,match
character,sequence on noread,sequence on mis-
position,match