Symbologies - Microscan MS-820 User Manual

Chapter
5
Symbologies by ESP ...............................................................................5-2
1D Symbologies.......................................................................................5-3
Stacked Symbologies ............................................................................5-20
AIAG ......................................................................................................5-21
Narrow Margins .....................................................................................5-23
Symbology ID ........................................................................................5-24
Background Color ..................................................................................5-25
Autodiscriminate ....................................................................................5-26
This section describes the various symbol types that can be read and decoded by the
scanner.
Code 39 is enabled by default. To enable all codes, right-click
under Symbol Type in the Utilities menu and select Enable, or send a
command to the scanner from the Terminal window.
Note: The characters NULL <> and
not through ESP or serial commands.
See www.aimusa.org/standards
1. If using an I 2/5 symbol, verify that the number of characters in the symbol being scanned
matches the symbol length enabled for the I 2/5 symbology type (default is 10 and 6).
MS-820 Industrial Bar Code Scanner User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Symbologies

Chapter Contents
Autodiscrimination
1
, can only be entered through embedded menus,
for additional information about symbologies.
<P> serial
5-1