Information In The Cdr - Polycom QDX 6000 Administrator's Manual

Statistics and Diagnostics

Information in the CDR

The following table describes the data fields in the CDR.
Data
Start Date
Start Time
End Date
End Time
Call Duration
Remote System
Name
Call Field Number 1
Call Field Number 2
(If applicable for
call)
Transport Type
Call Rate
System
Manufacturer
Call Direction
Conference ID
Call ID
Endpoint Alias
Endpoint Additional
Alias
Endpoint Type
Endpoint Transport
Address
Audio Protocol (Tx)
Audio Protocol (Rx)
10-6
Description
The call start date, in the format dd/mm/yyyy.
The call start time, in the 24-hour format hh:mm:ss.
The call end date.
The call end time.
The length of the call.
The far site's system name.
For outgoing calls — The number dialed from the first call
field, not necessarily the transport address.
For incoming calls — The caller ID information from the first
number received from a far site.
For outgoing calls — The number dialed from the second call
field, not necessarily the transport address.
For incoming calls — The caller ID information from the first
number received from a far site.
The type of call — H.323 (IP)
The bandwidth negotiated with the far site.
The name of the system manufacturer, model, and software
version, if they can be determined.
In — For calls received
Out — For calls placed from the system
A number given to each conference.
Identifies individual calls within the same conference.
The alias of the far site.
An additional alias of the far site.
Endpoint, gateway, or MCU.
The actual address of the far site (not necessarily the
address dialed).
The audio protocol transmitted to the far site, such as G.728
or G.722.1.
The audio protocol received from the far site, such as G.728
or G.722.