Regulatory Notices - Polycom QDX 6000 Administrator's Manual

Regulatory Notices

Read and understand the following instructions before using the system:












SAVE THESE INSTRUCTIONS.
Polycom QDX 6000: 100-240VAC, 50-60Hz, 1.5A
THE SOFTWARE PROGRAMS CONTAINED OR DESCRIBED HEREIN ARE
CONFIDENTIAL INFORMATION AND PROPRIETARY PRODUCTS OF POLYCOM,
INC. OR ITS LICENSORS.
Buyer shall not sublicense or otherwise distribute any of the Subject Programs except
to End Users and/or resellers who have entered into a Sublicense Agreement. For
purposes of this Agreement a "Sublicense Agreement" shall mean a written license
agreement between the Buyer and its purchaser, or, in the case of any sale by Buyer
to a reseller, between such reseller and the End User, that is either 1) signed by the
End User or 2) included with the Documentation, in such a manner that the End User
reasonably indicates its acceptance of the Sublicense Agreement by turning on and
using the Computer Equipment. Polycom, Inc. shall include so-called "break the seal
software licenses" with the Documentation, and Buyer shall not remove or alter any
Close supervision is necessary when the system is used by or near children. Do
not leave unattended while in use.
Only use electrical extension cords with a current rating at least equal to that of the
system.
Always disconnect the system from power before cleaning and servicing and when
not in use.
Do not spray liquids directly onto the system when cleaning. Always apply the
liquid first to a static free cloth.
Do not immerse the system in any liquid or place any liquids on it.
Do not disassemble this system. To reduce the risk of shock and to maintain the
warranty on the system, a qualified technician must perform service or repair work.
Connect this appliance to a grounded outlet.
Only connect the system to surge protected power outlets.
Keep ventilation openings free of any obstructions.
If the system or any accessories are installed in an enclosed space such as a
cabinet, ensure that the air temperature in the enclosure does not exceed 40°C
(104° F). You may need to provide forced cooling to keep the equipment within its
operating temperature range.
Do not use this product near water.
Avoid using this product during an electrical storm. There may be a remote risk of
electric shock from lighting.
Important Safeguards
Electrical Specifications
License Restrictions
15
15-1