Managing User Access To Settings And Features - Polycom QDX 6000 Administrator's Manual

3
To access Admin Settings using the Polycom QDX 6000 web interface when a
remote access password is set, enter "admin" for the user name.
To use the same password for both local and remote access:
1
2
To reset a forgotten password:
1
2
3
4
After the system resets, it leads you through the setup wizard. You can enter
a new password when you set up the system.

Managing User Access to Settings and Features

You can allow users to change common user preferences by providing access
to the User Settings screen.
To allow users to customize the workspace:
1
2
User Settings contains the following options, which can also be configured by
administrators on the Admin Settings screens:






password.
Enter a Remote Access password.
Go to System > Admin Settings > General Settings > Security.
Select Use Room Password for Remote Access.
Get the system's serial number from the system or from the System
Information screen.
Go to System > Diagnostics > Reset System.
If Security Mode is enabled, the room password is required to access the Reset
System screen.
Enter the system's serial number and select Delete System Settings.
Select Reset System.
Go to System > Admin Settings > General Settings > Security >
Select the Allow Access to User Settings option to make the User
Settings button available to users on the System screen.
Backlight Compensation
Far Control of Near Camera
Auto Answer Point-to-Point Video
Mute Auto-Answer Calls
PIP
Keypad Audio Confirmation
Administrator's Guide for Polycom QDX 6000 Systems
.
8-3