Screen Savers; Adding Screen Saver Text - Polycom QDX 6000 Administrator's Manual

To enter the marquee text using the Polycom QDX 6000 Web interface:
1
2
3
4
5

Screen Savers

Adding Screen Saver Text

You can customize the Polycom QDX 6000 system to display text when the
system is in sleep mode. For instance, you can display on-screen instructions
to assist users with what steps they should take next.
To enter screen saver text:
1
2
3
4
5
On a computer, open a Web browser.
In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 Web interface.
Enter the user name and administrator's password, if a password has
been established.
Click Admin Settings > General Settings > Home Screen Settings and
enter:
― Dialing Display - Set to Display Marquee.
― Enter Marquee Text - Type the text to display on the home screen.
Click Update.
Output upon Screen Saver Activation on the Monitors screen must be set to Black
if you want to display screen saver text.
On a computer, open a web browser.
In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 web interface.
Enter the user name and administrator's password, if a password has
been established.
Click Utilities > Screen Saver and enter:
― Screen Saver Text — Appears as scrolling text when the system is in
sleep mode. You can use this scrolling text to provide instructions or
next steps for users of the system.
― Logo Screen Text — Appears underneath the logo before the system
goes into sleep mode.
Click Update.
Administrator's Guide for Polycom QDX 6000 Systems
7-5