Polycom QDX 6000 Administrator's Manual page 12

Networks
Setting
Subnet Mask
Default Gateway
LAN Speed
Duplex Mode
3
Setting
Host Name
Domain Name
DNS servers
2-2
Description
Displays the subnet mask currently assigned to the system.
If the system does not automatically obtain a subnet mask,
enter one here.
Changing this setting causes the system to restart.
Displays the gateway currently assigned to the system.
If the system does not automatically obtain a gateway IP
address, enter one here.
Changing this setting causes the system to restart.
Specify the LAN speed to use. Note that the speed you
choose must be supported by the switch.
Choose Auto to have the network switch negotiate the speed
automatically. Choosing Auto automatically sets Duplex
Mode to Auto. If you choose 10 Mbps, 100 Mbps, or 1000
Mbps you must set Duplex Mode to Half or Full.
Note: Polycom does not support Auto for the Polycom QDX
6000 system only or the switch only; the settings for both must
be the same.
Changing this setting causes the system to restart.
Specify the duplex mode to use. Note that the Duplex mode
you choose must be supported by the switch.
Choose Auto to have the network switch negotiate the Duplex
mode automatically. Choosing Auto automatically sets LAN
Speed to Auto.
Note: Polycom does not support Auto for the Polycom QDX
6000 system only or the switch only; the settings for both must
be the same.
Changing this setting causes the system to restart.
Select and configure these settings:
Description
Indicates the system's DNS name.
Changing this setting causes the system to restart.
Notes: The host name can include letters, numbers and the
hyphen character (-). The host name cannot begin or end with
a hyphen.
Displays the domain name currently assigned to the system.
If the system does not automatically obtain a domain name,
enter one here.
Changing this setting causes the system to restart.
Displays the DNS servers currently assigned to the system.
If the system does not automatically obtain a DNS server
address, enter up to four DNS servers here.
Changing this setting causes the system to restart.