Configuring Remote Control Behavior - Polycom QDX 6000 Administrator's Manual

Calling and Answering
Setting
Display Global
Addresses
Display Name in
Global Directory
Save Global
Directory to
System
Group Name

Configuring Remote Control Behavior

You can customize the behavior of the remote control to support the users'
environment.
To configure remote control behavior:
1
2
Setting
Keypad Audio
Confirmation
Remote Control
Keypad
6-4
Description
Displays other registered systems in the global directory.
Specifies whether to display the system's name in the global
directories of other registered systems.
Copies the global directory to this local system. When this
setting is disabled, the system can display no more than
1,000 global directory entries. When this setting is enabled,
the system can display up to 4,000 global directory entries.
Specifies the group name used for global directory entries in
the local directory. In the directory, entries from Global
Directory Servers are listed in the Polycom GDS group.
Go to System > Admin Settings > General Settings > System Settings >
Remote Control.
Configure these settings on the Remote Control screen:
Description
Specifies whether to play a touch tones (DTMF)
confirmation of numbers selected with the remote
control or keypad.
Specifies whether pressing number buttons on the
remote control or keypad moves the camera to presets
or generates touch tones (DTMF tones). If this is set to
Presets, users can generate DTMF tones by pressing
while on a video screen.