Configuring Camera Settings And Video Quality Options - Polycom QDX 6000 Administrator's Manual

Video Input Number
2 (auxiliary camera)
3 (document camera)
4 (VCR)
5 (VGA)

Configuring Camera Settings and Video Quality Options

To configure camera and video settings:
1
2
Setting
Far Control of Near
Camera
Backlight
Compensation
Main,AUX, DOC,
VCR Camera
Default Video
Source
Connector
RCA
S-Video
RCA
VGA
Go to System > Admin Settings > Cameras.
Configure these settings on the Cameras screen:
Description
Specifies whether the far site can pan, tilt, or zoom the
near-site camera. When this option is selected, a user at
the far site can control the framing and angle of the camera
for the best view of the near site.
Specifies whether to have the camera automatically adjust
for a bright background. Backlight compensation is best
used in situations where the subject appears darker than
the background.
Sets the video quality of Main, AUX, DOC, VCR camera
video input depending on the active level contained in the
video picture：

Motion - This setting is for showing people or other video
with motion.

Sharpness - The picture will be sharp and clear, but
moderate to heavy motion at low call rates can cause
some frames to be dropped.
Sets the default camera for the Polycom QDX 6000 system
video input.
Administrator's Guide for Polycom QDX 6000 Systems
Format
Composite
S-Video
Composite
VGA
Power Control
None None
None None
None None
None None
3-7