Audio Meter - Polycom QDX 6000 Administrator's Manual

Hide thumbs Also See for QDX 6000:

Table of Contents

Administrator's Guide for Polycom QDX 6000 Systems

Audio meter

The audio meters in the user interface allow you to identify left and right

channels. The meters also indicate peak signal levels. Set signal levels so that

you see peaks between +3dB and +7dB with normal speech and program

material. Occasional peaks of +12 dB to +16 dB with loud transient noises are

acceptable. If you see +20 on the audio meter, the audio signal is 0 dBFS and

the audio might be distorted.

To access the audio meter:

Go to System > Diagnostics > Audio > Audio Meter.



4-3

Table of Contents

Do you have a question about the QDX 6000 and is the answer not in the manual?