Call Detail Report (Cdr); Information In The Cdr - Polycom QDX 6000 System Administrator's Manual

Call Detail Report (CDR)

Information in the CDR

When enabled, the Call Detail Report (CDR) provides the system's call history.
You can view the CDR from the Polycom QDX 6000 web interface. Within 5
minutes of the end of the call, the CDR is written to memory and then you can
download the data in CSV format for sorting and formatting.
Every call that connects is added to the CDR, whether it is a call that you make
or that you receive. If a call does not connect, the report shows the reason.
The CDR does not include incoming calls that the Polycom QDX 6000 system
does not answer, so if calls were missed while Do Not Disturb was enabled,
details will not be included in the CDR.
To view and download the CDR via the Polycom QDX 6000 web interface:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 web interface.
3. If prompted, enter the administrator account ( "admin" is default), and
enter the admin password.
4. Click Utilities > Call Detail Report to view the details of the file.
5. Click Save and then specify a location on your computer to save the file.
The following table describes the data fields in the CDR.
Data
Row ID
Start Date
Start Time
End Date
End Time
Call Duration
Account Number
Remote System
Name
Description
Each call is logged on the first available row. A call is a
connection to a single site, so there may be more than one
call in a conference.
The call start date, in the format dd-mm-yyyy.
The call start time, in the 24-hour format hh:mm:ss.
The call end date.
The call end time.
The length of the call.
If Require Account Number to Dial is enabled on the
system, the value entered by the user is displayed in this
field.
The far site's system name.
Statistics and Diagnostics
11 - 7