Displaying Speed Dial Sites; Adding Marquee Text - Polycom QDX 6000 Administrator's Manual

System Location and Appearance
Setting
Recent Calls
4
Setting
Sites
Last Number
Dialed

Displaying Speed Dial Sites

Sites configured for speed dial are displayed on the home screen.
To configure speed dial sites:
1
2
3
4
5
6

Adding Marquee Text

You can create marquee text to display in the dialing entry field on the home
screen. You can create context-specific instructions for your users or, if the
home screen has Site buttons, the marquee text can provide information that
helps users choose which site to call.
To enter marquee text in the Polycom QDX 6000 system interface:
1
2
You can also add marquee text through the Polycom QDX 6000 web interface.
For some languages such as Russian, Korean, Japanese, Simplified Chinese,
and Traditional Chinese, you must use the Polycom QDX 6000 web interface
to add marquee text.
7-4
Description
Specifies whether to display the Recent Calls button on the
home screen. The Recent Calls screen lists the site number or
name, the date and time, and whether the call was incoming or
outgoing.
Note: If the Call Detail Report option is not selected, the
Recent Calls option is not available.
Select and configure these settings:
Description
Allows users to access any pre-defined sites from a My
Contacts/Speed Dial list on the home screen.
Specifies whether to display the last number dialed or clear the
dialing field on the home screen.
Make sure that the site information is entered in the directory.
Go to System > Admin Settings > General Settings > Home Screen
Settings.
Select two times and enable Sites.
Select to access the Sites screen.
Select Add and choose the sites to add from the directory.
Select either Speed Dial or Contacts as the name you want to appear on
the button.
Go to System > Admin Settings > General Settings > Home Screen
Settings.
In Dialing Display, select Display Marquee and enter the text.