Position Data Transmission; Status Message Transmission; Scrambler Function - Icom iDAS IC-F3103D Instruction Manual

■ Position data transmission

When an optional HM-171GP or any other GPS receiver is con-
nected to the transceiver, the position (longitude and latitude) data
can automatically be transmitted when:
• When [PTT] is released.
- Set the 'Send with Logoff' item as 'Enable.'
• After sending a Status Call.
- Set the 'Send with Status Call' item as 'Enable.'
• After sending an SDM.
- Set the 'Send with SDM Call' item as 'Enable.'
• After sending an Emergency Call.
- Set the 'Send with Emergency' item as 'Enable.'
Ask your dealer or system operator for connection details.

■ Status message transmission

The status message can automatically be transmitted.
The status message is transmitted when the transceiver is turned
ON or OFF.
- Select a status message to be transmitted in 'Power ON Status'
or 'Power OFF Status' item, respectively.
- Select a target station ID in 'Power Status ID'.

■ Scrambler function

The voice scrambler function provides private communication be-
tween stations while operating in the digital mode.
Hold down [Scrambler] to turn ON the Scrambler function.
• Push [Scrambler] to turn OFF the Scrambler function.
dPMR OPERATION
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
32