Position Data Transmission; Status Message Transmission - Icom IC-F5122D Operating Manual

2
dPMR OPERATION
IMPORTANT: Setting an individual emergency channel is
recommended for dependable emergency call operation.
NOTE:
When the Digital Request Ack function is activated, the
transceiver transmits an emergency call with a request to
send back an acknowledgment.
9

■ Position data transmission

When a GPS receiver is connected to the transceiver, the
position (longitude and latitude) data can be automatically
transmitted:
• When the GPS request status message is received
• After sending a voice message
- Set the 'Send with Log-off' item to 'Enable.'
• After sending a status message
- Set the 'Send with Status Call' item to 'Enable.'
• After sending a message
- Set the 'Send with SDM Call' item to 'Enable.'
• After sending an Emergency call
- Set the 'Send with Emergency' item to 'Enable.'
Ask your dealer or system operator for connection details.

■ Status message transmission

A status message can be automatically transmitted.
A status message is transmitted:
• When the transceiver is turned ON or turned OFF
- Set a status message to be transmitted in 'Power ON Status' or
'Power OFF Status' item, respectively.
- Set the target station ID in 'Power Status ID.'
• After sending a voice message
Send with Log-off
- Set the '
- Set a status message to be transmitted in the 'Send Status
Number' item.
' item to 'Enable.'