Status Message Transmission; Dpmr Operation; Printer Connection - Icom IC-F3262DT Operating Manual

3

dPMR OPERATION

■ Status message transmission

Status messages can be automatically transmitted:
• When the transceiver is turned ON or OFF.
- Select a status message to be transmitted in the 'Power ON
Status' or 'Power OFF Status' item, respectively.
- Select a target station ID in the 'Power Status ID' item.
• At the end of a Voice call.
- Select a Status Message to be transmitted in the 'Send with
Voice Call' item.
NOTE: Configure the status message transmission set-
tings using the CS-F3160/F5060 (dPMR)
. Ask your dealer for details.
ware
27

■ Printer connection

When the optional OPC-1862
to the transceiver, a printer can be connected to print out the
received SDM content and the ID of the station that sent the
message.
Ask your dealer or system operator for connection details..
-
cloning soft
is connected
interface cable