Setting The Printer Parameters (#7 Printer); Pdl (#8 Pdl) - Canon iR1600 Service Manual

CHAPTER 13 TROUBLESHOOTING

5.4.5 Setting the Printer Parameters (#7 PRINTER)

Item
#2 NUMERIC Param
#3 PRINT COUNT
#4 PRINTER RESET
#7 PRINTER-#2 NUMERIC Param. (setting numerical parameters)
No.
0 to 3 not used
4 leading edge margin
5 trailing edge margin
6 to 30 not used
[No. 4]
Use it to set the margin along the leading edge of paper.
[No. 5]
Use it to set the margin along the trailing edge of paper.
#7 PRINTER-#3 PRINT COUNT
Use it to indicate the number of prints and the total number of prints.
#7 PRINTER-#4 PRINT RESET
Use it to reset the machine if 'E000' through 'E004' (error in fixing assembly) is indicated,
thus clearing the error.

5.4.6 PDL (#8 PDL)

See to PCL printer board service manual.
13-86
Use it to set the margin for paper.
Use it to indicate the number of prints.
Use it to reset the machine at time of an error in the fixing assembly,
thereby claring the error.
Function
COPYRIGHT© 2002 CANON INC.
Description
Range Unit
-
0 to 9999
unit : 0.1mm
0 to 9999
unit : 0.1mm
-
2000 CANON iR1600/iR2000 REV.1 JAN. 2002
Factory
-
30
70
-