Front Axle Disassembly - Taylor-Dunn ET-3000 Manual

Front Axle

FRONT AXLE DISASSEMBLY

Disassembling and reassembling involves removing and replacing the left and right steering knuckles
and king pin bushings. Refer to the following sections for information regarding these procedures:
Replace the Steering Knuckle
Replace the King Pins and Bushings
Note: The front axle does not have to be removed unless the axle
Axle with integral king pin shown
Page 6
beam must be replaced. Refer to
Installation
for information regarding removing the front axle.
Front Axle Removal and
T-48 AC / ET 3000
MB-T48-02