Front Axle Disassembly - Taylor-Dunn B0-248-TT Operation, T Roubleshooting And Replacement Parts Manual

Maintenance, Service, and Repair

FRONT AXLE DISASSEMBLY

Disassembling and reassembling involves removing and replacing the left and right steering knuckles and king pin
bushings. Refer to the following sections for information regarding these procedures:
Replace the Steering Knuckle
Replace the King Pins and Bushings
Front Axle
NOTE: The front axle does not have to be removed unless the axle beam must be replaced. Refer to
Removal and Installation
for information regarding removing the front axle.
Front Axle
Page 5