5. SYSTEM MAINTENANCE
5.1 SERVICE PROGRAM MODE
Make sure that the data-in LED ( ) is not on before you go into the SP mode. This
LED indicates that some data is coming to the machine. When the LED is on, wait for
the copier to process the data.
5.1.1 SP TABLES
See "Appendices" for the following information:
System SP Tables
Printer SP Tables
Scanner SP Tables
5.1.2 ENABLING AND DISABLING SERVICE PROGRAM MODE
The Service Program Mode is for use by service representatives only. If this mode is
used by anyone other than service representatives for any reason, data might be
deleted or settings might be changed. In such case, product quality cannot be
guaranteed any more.
Entering SP Mode
For details, ask your supervisor.
Exiting SP Mode
Press "Exit" on the LCD twice to return to the copy window.
SM
5-1
Service Program Mode
D086/D087