Input Check (Test Mode 03) - Toshiba e-studio600 Service Manual

2.2.1

Input check (Test mode 03)

The status of each input signal can be checked by pressing the [FAX] button, [COPY] button and
the digital keys in the test mode (03).
<Operation procedure>
[0][3]
[START]
[POWER]
Note: Note:
Initialization is performed before the equipment enters the test mode.
Items to be checked and the condition of the equipment when the buttons [A] to [H] are highlighted are
listed in the following pages.
e-STUDIO520/600/720/850 ERROR CODE AND SELF-DIAGNOSTIC MODE
[FAX]
[Digital keys]
or
[COPY]
[CLEAR]
Fig.2-2 Example of display during input check
2 - 28
(LCD ON)
[POWER] OFF/ON
March 2005 © TOSHIBA TEC
(Exit)