Toshiba e-studio600 Service Manual page 533

* If the USB storage device is not recognized properly, the following message is displayed and the
update is interrupted.
* "Update Failed." is displayed at the bottom of the LCD screen when the updating is not completed
properly. "Failed" appears next to the failed item on the status display.
March 2005 © TOSHIBA TEC
When the [Engine ROM] has been updated,
"Engine MAIN Update..Flash Update" is
changed to "Engine MAIN Update..Completed".
When all data has been updated, "Update Com-
pleted" is displayed.
e-STUDIO520/600/720/850 FIRMWARE UPDATING
6 - 47
6