Toshiba e-studio600 Service Manual page 507

[A] Precaution when writing the data
• Set the writing voltage (VID) to 3.3V.
• When writing the data, set the address from 0 to 3FFFFF. The data may not be written correctly if it
is not set.
• The Flash ROM in which the data will be written, on the download jig is selected by switching the
rotary switch on the adapter. Be sure to switch the rotary switch on the adapter depending on the
data (file) to be written.
Rotary Switch
1
2
3
4
5
6
Note: Note:
Be sure not to confuse different ROM Versions since the file name is identical although the ROM
version is different.
March 2005 © TOSHIBA TEC
File Name
Master Data
Scanner, Laser and PFC data
hdos.bin
1
2
3
4
N/A
6 - 21
05/11
System, Engine,
firmImage0.bin
firmImage1.bin
firmImage2.bin
N/A
N/A
N/A
e-STUDIO520/600/720/850 FIRMWARE UPDATING
Flash ROM
ROM1
ROM2
ROM3
ROM4
ROM5
ROM6
6