[C] Display during the update
Update is performed in parallel as shown in the transition diagram below.
System ROM
0. OS Update
2. UI Data Update
3. System Firmware
Update
Below is an example of the changes of the LCD screen during update. Note that the screen order may
be different from the actual one, because a parallel update is performed in the process.
March 2005 © TOSHIBA TEC
Item Selection Screen for Update
Master data
4. LSR Firmware
1. HDD Update
5. PFC Firmware
6. Engine Firmware
Update Completed
Fig.6-40
When the device is recognized properly, the
screen for selecting update items is displayed.
6 - 43
05/05
Laser ROM
Scanner ROM
7. Scanner Firmware
Update
PFC ROM
Update
Engine ROM
Update
e-STUDIO520/600/720/850 FIRMWARE UPDATING
Update
6