Toshiba e-studio600 Service Manual page 380

[ 4 ] Paper jam in inserter section
[EC00] Inserter feeding delay jam
Are the pickup roller, feed roller and separation roller tainted?
YES Æ Clean up the rollers.
È
NO
Is the harness between the inserter control board and separation sensor open-circuited?
YES Æ Replace the harness.
È
NO
Is the separation sensor working improperly?
YES Æ Replace the separation sensor.
È
NO
Replace the inserter control board.
[EC10] Inserter feeding stop jam
Are the transport roller and reverse roller tainted?
YES Æ Clean up the rollers.
È
NO
Is the harness between the inserter control board and separation sensor open-circuited?
YES Æ Replace the harness.
È
NO
Is the separation sensor working improperly?
YES Æ Replace the separation sensor.
È
NO
Replace the inserter control board.
e-STUDIO520/600/720/850 TROUBLESHOOTING
5 - 52
March 2005 © TOSHIBA TEC