Toshiba e-studio600 Service Manual page 315

* 14. Whole toner recycle unit
Clean up the toner in the toner recycle unit when replacing the developer material.
(1) Take off the toner recycle unit.
(2) Remove 3 screws to separate the recycle
toner hopper and the auger pipe.
(3) Vacuum off the toner inside and the supply
section of the recycle toner hopper.
(4) Remove 1 screw and take off the cover of the
supply opening.
(5) Vacuum off the toner in the auger section.
March 2005 © TOSHIBA TEC
Toner recycle unit
Fig.4-22
Recycle toner hopper
Fig.4-23
Cover
Fig.4-24
e-STUDIO520/600/720/850 PREVENTIVE MAINTENANCE (PM)
4 - 27
Supply section
Auger section
4