Adjustment Of The Scanner Section - Toshiba e-studio600 Service Manual

3.7

Adjustment of the Scanner Section

3.7.1 Carriages
[A] Installing carriage wires
When replacing the carriage wires, refer illustrations below:
[Front side]
Wire pulley
[Rear side]
Idler pulley
Adjustment of the carriage wire tension is not necessary since a certain tension is applied to the car-
riage wires by the tension springs.
Note: Note:
Make sure the tension applied to the wire is normal.
March 2005 © TOSHIBA TEC
Carriage-2
Carriage wire
Bracket for carriage-1
Hook
Tension spring
Fig.3-27
Carriage-2
Carriage wire
Tension spring
Fig.3-28
3 - 37
Idler pulley
Bracket for carriage-1
Hook
Wire pulley
e-STUDIO520/600/720/850 ADJUSTMENT
3