3.16 Adjustment of LCF (MP-4004)
3.16.1
Sheet sideways deviation adjustment
When the center of the printed image shifts to the front side or rear side, adjust the tray position taking
the following procedure.
<Procedure>
(1)
Pull out the tray unit.
(2)
Loosen 3 screws and move the adjustment board to the right position. Then screw it shut.
•
The center of the printed image shifts to the front side:
Move the adjustment board to the front side (Arrow (B) in the upper figure).
March 2005 © TOSHIBA TEC
A
B
Adjustment board
Fig.3-92
[ Rear ]
Feeding direction
[ Front ]
Fig.3-93
3 - 85
Center
e-STUDIO520/600/720/850 ADJUSTMENT
3