Toshiba e-studio600 Service Manual page 149

Classifi-
Code
cation
1372 Counter Heater and energizing time
accumulating counter Dis-
play/0 clearing
1376 Counter Counter for toner cartridge
rotation
1378 Counter Counter for period of time
fuser unit is at ready tem-
perature
1380 Counter Counter for period of time
fuser unit is at printing tem-
perature
1382 Counter Counter for period of time
fuser unit is at energy sav-
ing temperature/Counter
reset
1385 Image Number of output pages
process- (Thick paper 1)
ing
March 2005 © TOSHIBA TEC
Setting mode (08)
Default
Func- <Accept-
Items
tion
value>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
e-STUDIO520/600/720/850 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 125
RAM Contents
able
0 M The total period of time
the heater control has
been performed (when
the power is ON) is
counted but it is not
counted in the Sleep
mode.
When the counter value
of the fuser unit is reset
on the main unit screen
in the PM Support
mode, this counter
value is also reset in
sync.
0 M The number of the
toner cartridge rotation
is counted.
0 M The total period of time
the heater control has
been performed (when
the power is in the
ready status) is
counted.
When the counter value
of the fuser unit is reset
on the main unit screen
in the PM Support
mode, this counter
value is also reset in
sync.
0 M The total period of time
the heater control has
been performed (dur-
ing printing) is counted.
When the counter value
of the fuser unit is reset
on the main unit screen
in the PM Support
mode, this counter
value is also reset in
sync.
0 M The total period of time
the heater control has
been performed (when
the equipment is in the
Energy Saving mode) is
counted.
When the counter value
of the fuser unit is reset
on the main unit screen
in the PM Support
mode, this counter
value is also reset in
sync.
0 M The counter starts
counting up when the
registration sensor is
turned ON in the Thick
Paper 1 mode.
Proce-
dure
1
2
1
1
1
1
1