Table of Contents
Advertisement
11
®
Bluetooth
■ Pairing with a headset
This section describes how to pair with a Bluetooth
1.
Turning ON Bluetooth
Push [MENU
q
• Enters the MENU mode.
w Rotate [DIAL]S to select "BT" (Bluetooth
(MENU-EXMENU > EXMEN-BT SET > BTSET-BT)
ï]D.
Push [
e
• Goes to the next tree level.
Rotate [DIAL]
S to select "ON."
r
ï]D.
Push [
t
2.
Entering the pairing mode of the VS-3
• See the VS-3's instruction manual for details.
3.
Entering the pairing mode of the transceiver
y Rotate [DIAL]S to select "PAIR" (Paring).
(MENU-EXMENU > EXMEN-BT SET > BTSET-PAIR)
ï]D.
Push [
u
• "PAIRING" blinks, and pairing starts.
• While connecting, "CONNECTING" blinks.
• After the connecting to the headset, "CONNECTED" is dis-
played.
Push [MAIN BAND]
i
• Exits the MENU mode.
• Displays the Bluetooth
headset.
73
OPERATION
®
of the transceiver
]C.
®
).
S.
®
icon while connected to a Bluetooth
®
headset.
For your reference:
When the transceiver cannot find any available headset,
and "FAILED" is displayed on the display, push [ï]D to
search again for a headset.
For your reference:
The "AT CON" (Auto Connect) item is set to ON as the de-
fault, so the transceiver automatically connects to the paired
headset when the headset power is ON. (p. 16)
®
S ide
Appears
The C, S, or D in the
instructions indicate the
D isplay
area of the controller.
C: Center
S: Side
C enter
S ide
D: Display
Advertisement
Table of Contents
