Memory Channel; Copying Memory Content To The Vfo - Icom i2730A Instruction Manual

4
MEMORY OPERATION
Writing into a Memory or Call channel (Continued)
■
D Copying Memory content to the VFO
This is convenient when you want to change the frequency
beginning near the Memory or Call channel frequency.
Select a desired Memory channel to be copied. (p. 29)
q
Push [MW] C to display the Memory entry screen.
w
Rotate [DIAL] to select "TO VFO."
e
S
Push [ ï]D.
r
• Beeps sound.
• Writes the selected Memory content to the VFO, and returns to
the VFO mode.
D isplay
S ide C enter
31
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
S ide
D: Display
D Copying Memory content to another

Memory channel

You can copy the memory content to another Memory chan-
nel.
Select the desired Memory channel to be copied. (p. 29)
q
Push [MW] C to display the Memory entry screen.
w
Rotate [DIAL] to select "COPY."
e
S
Push [ ï]D.
r
Rotate [DIAL] to select a target channel.
t
S
• If you select a pre-entered channel, the previous channel con-
tent is displayed.
Push [ ï]D.
y
• Beeps sound.
• Copies to the destination channel.
• When you select a pre-entered channel, "OVERW?" is displayed.
Rotate [DIAL]S to select "YES," and then push [ï]D to over-
write it.
Select