Table of Contents
Advertisement
7
REPEATER AND DUPLEX OPERATIONS
Duplex operation (Continued)
■
D Duplex operation
Push [MONI DUP]
q
check whether another station is transmitting on it, or not.
• The transceiver transmit frequency appears on the display.
Push [MONI DUP]
w
operate normally.
NOTE: When the Auto repeater function is ON, and the op-
erating frequency is set out of the repeater output frequency
range, the duplex mode is automatically cancelled.
D isplay
S ide
C enter
51
to listen to the transmit frequency to
C
again to stop monitoring, and then
C
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
S ide
D: Display
■ Off band indication
If the transmit frequency is out of the amateur band, the off
band indication, "OFF," appears on the display when [PTT] is
pushed. Check the frequency offset or duplex direction in this
case. (p. 50)
Appears
Advertisement
Table of Contents
