Setting And Clearing The Skip Frequencies; Setting The Skip Frequencies - Icom i2730A Instruction Manual

■ Setting and clearing the skip frequencies

D Setting the skip frequencies
The frequencies set as "PSKIP" channels are not scanned.
Start the VFO scan. (p. 41)
q
• When a signal is received, the scan pauses.
To skip the frequency, hold down [MW]
w
til 3 beeps sound) while the scan is paused.
• When a signal is received during the scan, the transceiver at-
tempts to enter the frequency as a skip channel into empty
memory channel 999.
Skip frequency is entered
into channel 999.
• If channel 999 already has content, the transceiver automatically
searches for another blank channel to enter.
If no blank memory channel is found, a beep sounds, and no skip
channel is set.
After the skip channel is set, the scan resumes.
e
The C, S, or D in the instructions indicate the area of the
controller.
C: Center, S: Side, D: Display
D Clearing the skip frequencies
q
w
C for 1 second (un-
e
r
t
Blinks
y
u
i
o
!0 Rotate [DIAL]
!1 Rotate [DIAL]
!2 Push [ï]D.
For your reference:
The skip setting is also cancelled when the memory chan-
nel set as a skip channel is deleted. (p. 35)
SCAN OPERATION
Push [MR CALL]
S.
• Selects the Memory mode.
Rotate [DIAL] to select the memory channel you want to
S
clear as a skip channel. (Example: 999)
Push [MW] C to display the Memory edit screen.
Rotate [DIAL] to select "EDIT."
S
Push [ ï]D.
Rotate [DIAL] to select "SKIP."
S
Push [ ï]D.
Rotate [DIAL] to select "OFF."
S
Push [ ï]D.
to select "WRITE."
S
• Displays "OVERW?."
to select "YES."
S
• Beeps sound.
• Clears the skip setting.
5
5
42