Memory Scan; Memory Bank Scan; Memory (Skip) Scan - Icom i2730A Instruction Manual

5
SCAN OPERATION

■ Memory scan

There two types of scans in the memory mode; Memory scan
and Memory bank scan.
D Memory (skip) scan
Repeatedly scans all programmed Memory channels.
• Two or more memory channels, which are not set as skip channels,
must be programmed into start a memory scan.
Push [MR CALL]
q
S.
• Selects the Memory mode.
Hold down [V/MHz SCAN]
w
• Displays the scan type setting screen.
Rotate [DIAL] to select a desired scan type.
e
S
• ALL: Full scan
• BAND: Band memory scan
• MODE: Mode memory scan
• DUP: Duplex scan (p. 50)
( Appears only when duplex is set.)
• TONE: Tone scan
Push [V/MHz SCAN]
r
To cancel the scan, push [V/MHz SCAN]
t
D isplay
S ide C enter
43
S for 1 second.
S to start the scan.
S.
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
S ide
D: Display
D Memory bank scan
A memory bank scan searches through the memory chan-
nels in the selected bank.
• Two or more memory channels, that are not set as skip channels,
must be programmed to start a memory bank scan.
Push [MR CALL]
q S.
• Selects the Memory mode.
Hold down [MAIN BAND] S for 1 second.
w
Rotate [DIAL] to select the desired Bank group.
e
S
Push [MAIN BAND]
r S.
• Selects the Memory bank mode.
Hold down [V/MHz SCAN]
t
• Displays the scan type setting screen.
Rotate [DIAL] to select a desired scan type.
y
S
• ALL: Full bank scan
• B-LINK: Bank link scan
• BANK-A~BANK-J:
Bank scan
( Only banks which contain memory channels are
displayed.)
• DUP: Duplex scan (p. 50)
( Appears only when duplex is set.)
• TONE: Tone scan
Push [V/MHz SCAN] S to start the scan.
u
To cancel the scan, push [V/MHz SCAN]
i
When a bank name is assigned.
The name is displayed on the scan type setting screen.
See page 34 to enter the bank name.
S for 1 second.
S.