Table of Contents
Advertisement
11
Bluetooth
■ Operating Bluetooth
When you install the optional UT-133 Bluetooth
transceiver, you can connect to other Bluetooth
In this section, the IC-2730A/E with the UT-133 is described
as simply "transceiver."
When you connect the VS-3 Bluetooth
ceiver, you can wirelessly transmit and receive the headset
audio.
The VS-3 has a [PTT] switch, so you can transmit in the same
way as using the transceiver's [PTT] switch.
The VOX function can also be used, so you can toggle trans-
mit and receive by your voice through the headset.
You can assign a desired key function to the keys on the side
panel of the VS-3 to remotely operate the transceiver.
Communication range of Bluetooth
ters (32.8 ft).
The Bluetooth
®
communication range may vary, depending
on the environment in which the device operates.
Microwave ovens or Wireless LANs may cause interference.
In that case, stop using those devices or move away from
them.
This Bluetooth
®
device has a range of use. If the communi-
cation is unstable, use the device within the range.
71
®
OPERATION
®
®
in the
unit
®
devices.
®
to the trans-
headset
®
is approximately 10 me-
UT-133
Bluetooth
Transceiver with
the Bluetooth
unit
®
■ Electromagnetic Interference
When you use a Bluetooth
®
lowing:
Bluetooth
®
devices operate on the 2.4 GHz band.
The 2.4 GHz band is also used by other devices, such as
Wireless LAN products, microwave ovens, RFID systems,
amateur radio stations, and so on.
When using the Bluetooth
®
ference may occur, causing a decrease in communication
speed, and an unstable connection.
In such cases, use this device away from the other devices,
or stop using those devices.
Optional VS-3
®
(Bluetooth
Headset)
®
device, pay attention to the fol-
device near such devices, inter-
Advertisement
Table of Contents
