Setting The Tone Frequency; Setting The Repeater Tone Frequency - Icom i2730A Instruction Manual

D Setting the Tone frequency
Push [MENU ]C.
q
• Enters the MENU mode.
w Rotate [DIAL]S to select "C TONE" (TSQL Freq).
Push [ ï]D.
e
• Goes to the next tree level.
Rotate [DIAL] S to select a desired tone frequency.
r
Selectable options: 67.0 Hz to 254.1 Hz
Push [ ï]D.
t
• Sets the selected option, and goes back to the previous tree level.
Push [MAIN BAND]
y S.
• Exits the MENU mode.
D isplay
S ide C enter S ide
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display
OTHER FUNCTIONS
D Setting the Repeater Tone frequency
Push [MENU ]C.
q
• Enters the MENU mode.
w Rotate [DIAL]S to select "R TONE" (Repeater Tone).
Push [ ï]D.
e
• Goes to the next tree level.
Rotate [DIAL] S to select a desired tone frequency.
r
Selectable options: 67.0 Hz to 254.1 Hz
Push [ ï]D.
t
• Sets the selected option, and goes back to the previous tree level.
Push [MAIN BAND]
y S.
• Exits the MENU mode.
8
8
58