Setting And Clearing Skip Channels; Setting The Temporary Skip Function - Icom i2730A Instruction Manual

■ Setting and clearing skip
channels
The channels that are set as "SKIP" or "PSKIP" channels are
skipped (not scanned).
Push [MR CALL]
q
S.
• Selects the Memory mode.
Rotate [DIAL] to select a memory channel to be set.
w
S
Hold down [MW] C for 1 second to display the Memory
e
edit screen.
Push [ ï]D.
r
Rotate [DIAL] to select "SKIP."
t
S
ï]D.
Push [
y
Rotate [DIAL] to select a desired option.
u
S
• OFF: Cancel the skip setting.
• SKIP: Skipped during a memory scan.
• PSKIP: Skipped during both VFO and memory scans.
Rotate [DIAL] to select "WRITE."
i
S
• Displays "OVERW?."
Rotate [DIAL] to select "YES."
o
S
!0 Push [ï]D.
• Beeps sound, and sets the skip setting.
• "SKIP" appears.
• When you select "OFF" in step u, no icon appears.
■ Setting the temporary skip
function
This function temporarily skips up to five unwanted frequen-
cies during a scan, for the set time period, without setting the
skip frequency.
This function can be used only when the HM-207 (supplied),
HM-154 (optional) microphone or VS-3
connected.
Start a VFO scan. (p. 41)
q
• When a signal is received, the scan pauses.
While the scan is pausing, push the key that the "T-SKIP"
w
(Temporary Skip) function is assigned to.
• The Temporary skip function is set.
After setting the temporary skip function, the scan resumes.
e
• After the Temporary Skip time period passes, or the scan is can-
celled, the Temporary Skip is also cancelled.
For your reference:
• Up to five Temporary Skip frequencies or memories can
be set.
• During a Memory scan, follow steps w and e to skip the
channel for the set time period (Default: 5 minutes).
• The Temporary Skip time period is set to "5 minutes" by
default. You can change the setting in the "TEMP" (Tempo-
rary Skip Timer) item of EXMENU mode. (p. 13)
SCAN OPERATION
Bluetooth ®
headset
5
is
5
44